Leave Your Message

Table Blast Machine For Additive Manufacturing Part Surface Finishing

Automated Surface Treatment & Shot Peening Systems for Industrial 3D Printed Components

The Industrial Landscape of Additive Manufacturing Surface Finishing

Why Post-Processing is the Critical Milestone in Industrializing 3D Printed Metal & Polymer Components.

Additive Manufacturing (AM) has revolutionized modern production, enabling the fabrication of complex, lightweight geometries that were once deemed impossible using traditional CNC machining or casting methods. From aerospace engine components and patient-specific orthopedic implants to high-performance automotive manifolds, AM has firmly transitioned from rapid prototyping to high-volume end-use production. However, this transition has highlighted a significant bottleneck: surface quality.

Direct Metal Laser Sintering (DMLS), Selective Laser Melting (SLM), and Electron Beam Melting (EBM) processes inherently leave parts with high surface roughness (Ra values often ranging from 10 to 30 microns), powder adhesion, and visible "stair-stepping" layer lines. In critical industries like aerospace and medical devices, these surface imperfections are not merely aesthetic issues—they are structural hazards. Rough surfaces act as stress concentrators, dramatically reducing the fatigue life of the component under cyclic loading conditions. Unmelted powder particles also present severe risks of contamination and system failure if they detach during operation.

★ Industry Insight: Post-processing and surface finishing currently account for up to 30% to 50% of the total manufacturing cost of an additive manufactured metal component. Automating this phase is essential to achieving commercial scalability.

This is where the Table Blast Machine plays a pivotal role. Specifically engineered for the diverse and complex geometries of additive manufacturing, rotary table blast systems provide a highly automated, uniform, and controllable method to remove partially sintered powder, reduce surface roughness, and induce beneficial compressive residual stresses. By utilizing a rotating table, these machines expose all facets of the components to the blasting media, ensuring consistent coverage and repeatable finishes across complex batches.

Optimizing Surface Finishing With Table Blast Systems

Table blast machines designed for additive manufacturing are not standard off-the-shelf blasting cabinets. They are engineered to address the specific physical characteristics of 3D-printed metals such as Titanium (Ti64), Inconel, Cobalt-Chrome, Stainless Steel, and Aluminum. The mechanical action involves propelling precise abrasive media—such as ceramic beads, glass microspheres, or fine steel shot—at high velocities using compressed air or centrifugal blast wheels.

The primary advantage of the table configuration is its ability to handle multiple parts simultaneously or large single parts with intricate profiles. As the table rotates within the blast chamber, strategically positioned oscillating nozzles or high-efficiency wheels target the parts from multiple angles. This eliminates "shadowing" effects where recessed areas or internal passages might otherwise be missed. The result is a highly uniform matte or satin finish, with significantly reduced surface roughness (Ra) down to single-digit microns, ready for subsequent coating, anodizing, or direct assembly.

Koshin Precision Advanced Production Base - Integrated Manufacturing

Core Tech - Digital Governance

Digital Closed-Loop System and Audit-Ready Digital Documentation & Full Process Traceability

01

Real-Time Flow Monitoring

Continuous tracking of media flow rates and blasting pressure, ensuring that every square millimeter of the AM component receives consistent energy impact.

02

Automated Intensity Control

Dynamic adjustments of nozzle parameters and table rotation speeds to maintain precise peening intensity across varying part geometries and materials.

03

Unrivaled Repeatability

Achieving process repeatability that exceeds the stringent SAE AMS 2432 requirements (+0.025mmA), providing the documentation required for aerospace flight certification.

In high-stakes industries like aerospace and defense, process verification is just as critical as the physical finish. Koshin Precision’s digital closed-loop system monitors, records, and analyzes every blasting parameter. This real-time data capture ensures that every batch of 3D-printed parts is subjected to the exact same kinetic energy, providing full traceability from the raw printed state to the final certified component. This level of digital governance makes our table blast machines fully audit-ready for Nadcap and FAA evaluations.

Deep Application Scenarios in Additive Manufacturing

How Different Industries Leverage Table Blasting and Peening to Unlock the True Potential of 3D Printing.

1. Aerospace Engine & Structural Components

Aerospace manufacturers utilize metal 3D printing to create lightweight brackets, fuel nozzles, and turbine blades with internal cooling channels. However, these parts are subject to extreme thermal and mechanical stresses. Table blast machines equipped with shot peening capabilities are deployed to combat fatigue failure. By bombarding the surface with spherical media under controlled conditions, the process induces a layer of compressive residual stress. This compressive layer acts as a barrier, preventing micro-cracks from initiating and propagating, thereby extending the service life of critical flight components.

2. Medical Implants & Orthopedics

Additive manufacturing excels at producing custom titanium hip joints, bone plates, and dental implants with porous structures that mimic natural bone. While the porous regions are designed to encourage osseointegration (bone ingrowth), the solid mating surfaces and load-bearing columns must be smoothly finished to prevent wear debris and tissue irritation. A table blast machine utilizing fine glass bead or ceramic media can selectively finish these components, ensuring the solid areas are polished to perfection while preserving the integrity of the porous structures.

3. Automotive Performance & EV Components

In the automotive sector, AM is used for rapid tooling, custom brackets, and electric vehicle (EV) motor housings. The surface finish of these parts directly influences aerodynamic efficiency, fluid flow, and heat dissipation. Automated table blasting provides a rapid, cost-effective way to process batches of these components, removing powder residues and achieving a consistent surface roughness that optimizes fluid dynamics and prepares the parts for protective coatings or paint adhesion.

4. Mold Tooling & Conformally Cooled Inserts

Injection molds with conformally cooled channels manufactured via AM must have smooth external surfaces to prevent defects on the molded plastic parts. Table blast machines quickly clean and finish these heavy tool steel inserts, improving wear resistance and thermal transfer efficiency while reducing cycle times compared to manual hand-polishing methods.

Koshin Precision Manufacturing Facility

Integrated Manufacturing in China

Manufacturing and system integration are carried out at our advanced production base in China, leveraging mature industrial infrastructure and a highly skilled technical workforce for large-scale system integration. This integrated model allows Koshin Precision to translate high-end engineering design into robust, repeatable, and commercially sustainable equipment, without reliance on overseas manufacturing facilities.

Our production base collaborates with leading global enterprises, demonstrating our capability to meet the most demanding international standards. We are proud to partner with and support industry leaders including BOEING, AIRBUS, AVIC, COMAC, SAFRAN, SAESL, MTU, ETC.

Lifecycle-Oriented Management

Koshin Precision supports customers throughout the full equipment lifecycle, ensuring long-term operational success.

Solution Alignment

Early Technical Alignment and Process Definition to match your specific AM alloys and geometry requirements.

Design Confirmation

Engineering Clarification and Design Finalization utilizing advanced 3D modeling and simulation tools.

System Delivery

Precision Manufacturing, rigorous factory testing, on-site Installation, and complete system Commissioning.

Operator Readiness

Comprehensive hands-on training, process validation support, and sustained production engineering support.

In compliance with global industry standards

NADCAP, ISO9001, ISO14001, ISO45001, CE, SAE AMS

Global Lifecycle Support

Engineering expertise and round-the-clock technical assistance to maximize system uptime.

01

  • Process Definition
  • Singapore-Led Tech Support
  • Aerospace-Certified Engineers

02

  • System Delivery Global
  • Global Service Network
  • 24/7 Response Worldwide

03

  • Remote Digital Diagnostics
  • Singapore-Led Tech Support
  • Aerospace-Certified Engineers

Future Trends in AM Post-Processing

Where the industry is heading: Automation, Sustainability, and Intelligent Systems.

As additive manufacturing scales up to true mass production, the surface finishing sector is undergoing rapid technological evolution. The future of table blast machines lies in the integration of Smart Sensors and Internet of Things (IoT) connectivity. Future systems will feature predictive maintenance capabilities, alerting operators to nozzle wear or media degradation before it impacts the surface quality of the parts. This minimizes unplanned downtime and ensures continuous, high-yield production.

Furthermore, environmental sustainability is becoming a key driver. Modern table blast machines are incorporating advanced dust collection and media recycling systems. By separating usable media from broken particles and fine dust, these systems reduce waste, lower operating costs, and maintain a cleaner, safer workshop environment. The adoption of green blasting practices aligns with the broader environmental goals of global manufacturers looking to minimize their carbon footprint.

Finally, robotic integration is transforming the loading and unloading processes. Collaborative robots (cobots) can be paired with table blast machines to automate part handling, allowing for continuous, lights-out operation. This integration reduces labor costs, eliminates human error, and ensures that the post-processing phase keeps pace with the rapid print speeds of modern 3D printers.